astao309
15-07-20 3 Hits

Product Description
Model:HK-LD12
Input power:380W
Max. drilling dia.Steel:10mm
Aluminum:10mm
Wood:13mm
Idle speed0-1300rpm
Voltage220V
Frequency50Hz
Packing60.8*32.3*28.5cm
G.W./N.W.:16.5/15.6

Charging drill is a hand drill with a lithium-ion battery or nickel-cadmium battery that can be recharged repeatedly. This hand drill does not require external power supply work, it is suitable for use in the field or no power supply.
1, rechargeable battery handling
Battery Removal: Hold the handle firmly and push the battery latch to remove the battery. Rechargeable battery installation: Confirm positive and negative then insert the battery.
2, charging
Insert the rechargeable battery correctly into the charger and fully charge it at about 1h at 20 ° C. Note that the internal rechargeable battery with temperature-controlled switch, the battery will be more than 45 ℃ off without charging, cooling can be charged.
3, before the job
a, drill handling. Installing the drill bit: After inserting the drill bit, drill bit, etc. into the drill-less drill chuck, hold the ring firmly and tighten the sleeve sleeve backwards (clockwise from below). If the sleeve becomes loose during operation, tighten the sleeve again. Tighten the sleeve, the tightening force will be stronger and stronger.
Disassemble bit: Hold the ring firmly and loosen the sleeve to the left (counterclockwise as viewed from the front).
b, check the steering. When the selection handle is in the R position, the drill bit rotates clockwise (as seen from the back of the charging drill), the drill rotates counterclockwise (from behind the charging drill) with the selection handle set to L, the "R" , "L" symbol marked on the body.
Caution: When changing the rotation speed with the rotary knob, confirm that the power switch is turned off and change the rotation speed while the motor is rotating, which will damage the gear.
4, the use of methods
Drill bit does not get stuck when using charging drill. If stuck, turn off the power immediately, otherwise the motor or rechargeable battery will be destroyed.
5, maintenance and precautions
When the drill bit is contaminated, please wipe with a damp cloth with a soft cloth or soapy water. Do not use chlorine solution, gasoline, thinner to avoid partial melting of the plastic.
Charging drill should be stored in temperatures below 40 ℃, and minors can not get the place High Quality Li-ion Electric Drill
website:http://www.hankungift.com/li-ion-electric-drill/

>http://www.hankungift.com/li-ion-electric-drill/

  Send Message

Related ads

Buy UV Laser Marking Machine

Product Description Desktop UV laser marking machine MAIN FEATURES 1. The UV laser generator is high integrated, has superior laser beam and uniform power density. Output laser power is stable. This design highly increase the machine鈥檚 anti-reflection…

Belt Braiding Machine

Overview Quick Details Power(W) 0.75KW Warranty 1 Year Place of Origin Nantong, China Brand Name XingLong Max Horngear Speed 360rpm/min Bobbin Size 48X140mm Certificate CE ISO Gross Weight 530 KGS Head qty 1鏈?鏃? Stop Motion Yarn Breakage…

Customized Inflatable Bumper Ball

Our History We were established in 2009 and have 11 years of development history so far ---- Our Factory Our industrial zone has about 4,000 square meters of workshops and 2,000 square meters of open space; the industrial zone has 3 workshops and an…

Fine Chemical

Basic Information Product Name Glycol Distearate Synonym Alkamuls EGDS;EGDS;Elfan L 310;Emerest 2355;Ethylene glycol dioctadecanoate;Ethylene glycol distearate VA;Ethylene stearate;ethyleneglycoldlstearate Product No GIHI-047 Formula C38H74O4 CAS NO…

Zinc Plated Light Guard

Littel Wire Product. is a custom manufacturer of fabricated wire and metal products which has been in this field for over 20 years.Thanks to the know-how acquired over the years,today Littel is ranked at the top in the production of wire products in…

Report this ad